1
2
Getting Started
1. GETTING STARTED
The system comes with the following
components:
• 1 x Camera
• 1 x Mounting Screw Kit
• 1 x Mounting Template
• 1 x Instruction Manual
• 1 x Software/Documentation CD
Mounting Screw Kit:
• 3 x mounting screws
(PA4 30mm)
• 3 x drywall anchors
1.1 Default Camera Username, Password, and Ports
Username:
admin
Password:
admin
Ports:
80
(HTTP),
30001
(Control/Streaming),
8080
(RTMP),
554
(RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once you have completed the basic setup of the camera, it is
recommended to configure a static IP address. This will prevent the camera
IP address changing in the event of a power failure. For details, see “6.7.1
Local Network” on page 26.
Getting Started
1.2 Camera Overview
Base Mounting
Lens
IR LED’s
Adjust
CdS Light sensor
1.2.1 Functions of Status LED’s
•
No status LEDs on this model
.
