background image

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of 

purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in writing 

of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly maintained and used in 

accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages whatsoever, including incidental 

or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the defective goods. Before installation and 

use, the purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk and liability whatever in 

connection therewith. Where permitted by law, the implied warranty of merchantability is expressly excluded. If the products sold hereunder are 

“consumer products,” the implied warranty of merchantability is limited to a period of three years and shall be limited solely to the replacement of 

the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.

ZER6000AV-W2

ZER6003AV-W2

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Connected AquaSense

®

Battery Powered Flush Valve

ZER-W2 Series

Installation, Operation, Maintenance

and Parts Manual

Patented and Patents Pending

Summary of Contents for AquaSense ZER-W2 Series













Reviews: