Chapter 4 Video Source Settings
4.4 Presetting the Position of the Camera
After presetting the position of a camera, you can use a number from 0 to 9 to name
and save the preset position. If you activate the preset camera position, the camera is
automatically adjusted to the preset position.
This section describes how to preset a camera through the remote control. The methods
for presetting a camera through the Web page and PC console are similar.
Prerequisite
The camera should support the camera presetting function.
Steps
1.
Adjust the camera to the required position. For example, adjust the camera to face
the host of the conference.
2.
In the active video, press the
camera
key and select the
Preset
option. The
Preset
the camera position
screen is displayed.
Alternatively, you can press the
preset
key. The
Preset the camera position
screen
is displayed.
3.
Use the remote control to select a preset position, such as position 2, and then press
the
OK
key. If the camera in position 2 is selected, it indicates that the position of the
current camera is successfully preset to position 2.
4.
(Optional) To change the current preset position, repeat Steps 1-3.
5.
(Optional) To clear a preset position, select the preset position, and press the
OK
key
on remote control.
To clear all preset positions, press the
delete
key on remote control.
– End of Steps –
4.5 Activating the Preset Position
To activate the preset position, the TV screen can display all the video sources that have
been configured with the preset positions of the ZXV10 T700 terminal.
After the preset positions are activated, the camera will automatically adjust to the preset
direction.
This section describes how to activate a preset position by using the remote control, similar
to the procedures of Web page and PC console.
Prerequisite
l
The video source is switched to the camera for which the preset position is to be
activated.
4-3
SJ-20120112164919-002|2012-05-10 (R1.1)
ZTE Proprietary and Confidential
