ZXV10 T700 User Guide
Steps
1.
Configure the system date and time. The parameters are described in the table below.
Parameter
Name
Description
Date Format
Set the format of the date:
YYYY-MM-DD
,
DD-MM-YYYY
,
MM-DD-YYYY
.
Date
Set the system date according to the date format.
Time
Set the system time.
2.
Select
Next
and configure the display information. The parameters are described in
the table below.
Parameter
Name
Description
Terminal Name
Enter a name to identify different video conference terminals.
Language
Select a displaying language of ZXV10 T700 screens. Three languages are
supported on GUI:
English
,
Chinese
and
Spanish
.
PIP Position
Select a displaying position for the PIP video. The available options are any
one of the four corners of the TV set screen.
OSD Option
Select the displaying mode of system status icons:
l
Always On
: The system status icons are always displayed on the screen
of the TV set in corresponding status.
l
Auto
: The system determines whether to display the corresponding icons
according to the operating status. If users do not perform any operation
over 10 seconds, the status icons will disappear automatically.
l
Always Off
: The system status icons are not displayed on the screen of
the TV set.
Name Option
Select the displaying mode of conference site name.
l
Sending Terminal
: Overlay the local site name on the local site image
at the sending side.
l
Receiving Terminal
: Overlay the remote site image and remote site
name on the receiving side.
This feature is not available currently.
l
Close
: The system does not overlay conference site name.
Show MSG Box
Setup whether to display the message box.
3.
Select
Next
and configure the network connection. The parameters are described in
the table below.
Parameter Name
Description
Speed
Select a exact mode due to your network.
Address Type
Suggest to select
Static IP
.
1-4
SJ-20120112164919-002|2012-05-10 (R1.1)
ZTE Proprietary and Confidential
