Zte ZXV10 ET312 User Manual Download Page 11

Page: 11 / 84

Chapter 2

Product Overview

Table of Contents

Product Positioning and Characteristics .....................................................................2-1

Product Structure .......................................................................................................2-3

Functions ...................................................................................................................2-6

Network Deployment ..................................................................................................2-7

Interfaces and Protocols.............................................................................................2-9

Technical Specifications ...........................................................................................2-10

Environmental Requirements ................................................................................... 2-11

Compliant Standards................................................................................................2-12

2.1 Product Positioning and Characteristics

2.1.1 Product Positioning

The ZXV10 ET312 is a new-generation lightweight videoconferencing terminal developed

by ZTE. It uses a separate structure , and is easy to deploy and operate.

Based on the international standard

SIP

and H.323 protocols, the ZXV10 ET312 has a full

set of professional audio and video service components, supports 1080p ultra HD video ,

has good network adaptability and security, and is applicable to various types of small and

medium-sized video conferences.

2.1.2 Product Characteristics

Ultra HD Videoconferencing at Low Bandwidth

Provides 720p and 1080p HD video images at 256 kbps and 512 kbps bandwidth

respectively, offering more lifelike, clearer, and more fluent video images at the same

bandwidth.

Supports a maximum 4 Mbps conference rate, providing ultra-high efficiency video

effects.

Displays images in natural colors and clear layers, eliminates the mosaic effect, and

prevents images from flashing.

Supports enhanced encoding in critical areas, presenting clear images.

Highly Integrated Design that Immensely Simplifies Installation and Deployment

The interfaces are extremely simple and efficient.

2-1

SJ-20190419092037-001|2019-04-08 (R1.0)

ZTE Proprietary and Confidential

Summary of Contents for ZXV10 ET312





















































































Search results

Summary of Contents for ZXV10 ET312

Reviews:

Related manuals for ZXV10 ET312

Brands by name

Popular brands

Zte ZXV10 ET312, User Manual

Search results

Summary of Contents for ZXV10 ET312

Reviews:

Related manuals for ZXV10 ET312

Brands by name

Popular brands