Zte ZXV10 ET312 User Manual Download Page 39

Page: 39 / 84

Chapter 4 System Configurations

Parameter

Description

Registration policy

Register Policy

refers to the processing policy used by the

terminal when the user name to be registered by the terminal is

already registered.

Working Mode

is set to

IMS_SIP

TELECOM_SIP

, this

parameter is available.

Mandatory

: If the user name that the terminal wants to

and the user name will be used for the terminal registration.

Manual

: If the user name that the terminal wants to register

has been registered, a message will be displayed, asking the

user to confirm whether to register this user name.

Intelligent

: If the user name that the terminal wants to register

has been registered, no message will be displayed and the

terminal keeps querying till this user name is available.

Mandatory

Manual

is recommended.

SIP domain name

If the work mode is

IMS_SIP

TELECOM_SIP

, this setting is

required.

The SIP domain name registered by the terminal is assigned by

the administrator.

After the configuration is completed, click

Save

Result

If the terminal is successfully registered to the SIP cloud service,

and SIP user name

are displayed in the upper right corner, for example, BIJ001.

4.1.4 Configuring the H.323 Conference Cloud Service

With the

H.323

(ITU-T Rec.

Packet-based Multimedia Communications Systems)

conference cloud service, the ZXV10 ET312 terminal can communicate with terminals

using the same H.323 cloud service, and initiate two-party or multi-party video

conferences.

Prerequisite

The terminal is not engaged in a conference.

The network is properly connected.

Context

The GK is a gate keeper of the video conference for bandwidth management, terminal

authentication, and address translation. You can use registered name or terminal number

instead of a changeable IP address to initiate a call.

4-9

SJ-20190419092037-001|2019-04-08 (R1.0)

ZTE Proprietary and Confidential

Summary of Contents for ZXV10 ET312





















































































Search results

Summary of Contents for ZXV10 ET312

Reviews:

Related manuals for ZXV10 ET312

Brands by name

Popular brands

Zte ZXV10 ET312, User Manual

Search results

Summary of Contents for ZXV10 ET312

Reviews:

Related manuals for ZXV10 ET312

Brands by name

Popular brands