Zowietek Electronicszowietek Micro Pocket DVR I, User Manual

Page: 49 / 203

Micro Pocket DVR User’s Manual
- 43 -
surveillance, scout, wildlife protect & observe etc, you need record all useful video over a
long time range on a CF card, you must forsake useless resting video to save storage
space on CF card. You can enable Motion Detection function to get it.
The default configuration of Motion detection is disabling, you need enable it if you want to
use this function.
To avoid unconcerned locomotors object to active Motion Detection, you can set
Sensitivity of Motion Detection, the value means the size proportion of locomotors object
than fully screen area.
You can estimate the size proportion of object that you want to catch, at once Micro
Pocket DVR detect a locomotors object that match sensitivity value that you setting, it will
begin to record video automatically until duration time that you setting is finished.
The default value of Sensitivity is 70% of full recording video screen area.
Micro Pocket DVR will recording continuously until duration time is finished when Motion
Detection recording be actives. You can change Duration time depend on your
requirement to record all useful video or save more storage space on CF card.
The default value of duration time is 10 minutes.
Micro Pocket DVR will start recording at once Motion Detection be actives, it will stop
recording when duration time is finished, if Micro Pocket DVR detect other suited
locomotors object in duration time, the duration time will be postponed based on the last
suited object.
Actual duration time is always timed based on the last suited locomotors object that be