Zowietek Electronicszowietek Micro Pocket DVR I, User Manual

Page: 11 / 203

Micro Pocket DVR User’s Manual
- 5 -
2.2.3 Startup
1) Connect AC power adapter
2) Micro Pocket DVR will start self-diagnostics when power on
3) The LED is red in self-diagnostics and will turn yellow on start-up. The LED turns to
green once start-up successful.
It takes about 12 seconds to startup
4) The LCD displays Init… during startup, after startup successful, the LCD will
display Micro DVR
5) You will hear a beep one time once Micro Pocket DVR start-up
The Vibration Motor will vibrate one time once when Micro Pocket DVR start-up
successfully
*
6) The battery will be charged automatically when power on and LED turns on red
The battery should be fully charged before first use. The charging LED goes out once
charge finished.
Please charge the internal Li-Ion Polymer battery over night & until the charging LED goes
out. Li-ion Polymer rechargeable battery is expendable.
The battery should be replaced after 500 charge cycles. The used battery should be
disposed properly.
* The Beep & Vibration Motor is only one in Micro Pocket DVR, the Beep is standard part, and
Vibration Motor is optional only for special model.
2.2.4 Safety and Warning
* Never connect Multi-Connect Cable Power output to any power adapter. It may be damage the
interface and board.
* There are no user serviceable parts, please do not open the unit. Doing so can damage the unit
and will void your warranty.
* Restrict input voltage to range from 9V to 15DC, 12V DC is recommended. Never apply DC
voltage beyond this range or AC voltage to the Micro Pocket DVR.
* Only use AC power adapter supplied with the unit. Do not use third party AC power adapter, it
may cau
se unexpected problems or damage.
* Restrict powering devices drawing more than 200mA current for 1CH Micro Pocket DVR.
* Restrict powering devices drawing more than 700mA current for 4CH Micro Pocket DVR.
* When Micro Pocket DVR powered by internal battery, don’t connect camera more than 1pcs for
1CH Micro DVR. And don’t connect cameras more than 2pcs for 2CH/3CH/4CH Micro Pocket DVR.
* Never insert and remove CF card while power is on.