Zowietek Electronicszowietek Micro Pocket DVR I, User Manual

Page: 196 / 203

Firmware Upgrade
- 190 -
14. Firmware Upgrade
NOTE: Please don’t connect camera & other external device to Micro DVR when you
upgrade Micro DVR!
The firmware of the Micro Pocket DVR can be upgraded if necessary. The Micro Pocket
DVR will check the core image file on CF card while power up. If image & OSD file is
found then the firmware of the Micro Pocket DVR will be upgraded automatically. Please
follow below instructions to upgrade.
1) Format CF card in FAT32 file system.
2) Copy imge.2510.img and osd.img to the root of CF card.
3) Use Micro Pocket DVR Desktop to generate DEVICE.INI depended on your
needs. DEVICE.INI must be under the root of CF card while upgrading.
4) Power off and then insert CF card into Micro Pocket DVR.
5) Turn on the power of Micro Pocket DVR.
6) The firmware will be upgraded after power on. The LED turns to red, then yellow and
alternately flashes red and yellow several times. It takes about two minutes to upgrade.
At the same time, LCD will display schedule of upgrade process if you upgrade from
Firmware V1.0.4 or newer.
When the Micro Pocket DVR upgrades successfully, it will reboot automatically.
Update Micro Pocket DVR I
Update Micro Pocket DVR II
* DON’T TURN OFF POWER DURING THIS PERIOD!!
7) The Micro Pocket DVR will be rebooted automatically after upgrade. The LED will
change to red, yellow and then green. It takes about 12 seconds to reboot.
8) Over if the LED is green. A Beep will sound one time once the Micro Pocket DVR
upgrades successfully.