Zoom ZoomAir AP11, Installation Manual

Page: 79 / 80

Appendix E: Regulatory Information 79
Before installing the equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of concern. The
customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas. Caution : Users should not attempt to make such
connections themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
Notice : The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
Canada Repair Center Information:
Zoom Telephonics, Inc.
13920 - 200 Granville Street
Vancouver, BC V6C 1S4
CANADA
Telephone Number: 604.687.1444
Industry Canada Emissions Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
Declaration of Conformity
The following harmonized European Standards have been applied:
Standards Directives Test Reports Issued
EN 60950 73/23/EEC -Low Voltage electrical safety
EN 50082-1 89/336/EEC -EMC EMC-immunity
EN 55022 89/336/EEC - EMC EMC-emissions
The manufacturer declares under sole responsibility that the product complies
with the harmonized European Safety and EMC standards / directives listed
above.
The product is CE Marked.