manualshive.com logo in svg

Zoom ZoomAir AP11, Installation Manual

Share
Download
Zoom ZoomAir AP11 Installation Manual Download Page 36

36

Installation Guide: Z

OOM

A

IR 

AP11

Try printing to the printer connected to a networked computer,
and try to open or copy files from remote clients.
If you encounter difficulties, check the following and make any
necessary modifications:

•

 

All ZoomAir PC Cards are firmly plugged in. The red light

indicates that the card is receiving power. When used as an

access point, a slowly flashing green light indicates that the

ZoomAir PC Card is linked to the network. The ZoomAir

client computers will display a green monitor icon in the

system tray when the client is linked to the network. The icon
will be red if the client is not linked.

•

 

All wireless clients and the ZoomAir AP11

 

have the same

SSID (and WEP key if it’s used).

•

 

All cables are firmly plugged in.

•

 

Antennas are oriented correctly.

•

 

All client computers are turned on.

•

 

Each computer has file and printer sharing enabled, as
appropriate, and there is at least one folder set up for sharing.

•

 

Each client has a unique IP address.

•

 

Network Neighborhood

 has been given enough time to

recognize all the clients on the network (this can take several

minutes).

•

 

The clients are not too far from the ZoomAir AP11

 

unit.

Although the range in a typical office is 300 feet (about 90

meters) and 1,000 feet (about 300 meters) in unobstructed line

of sight, any obstacles may diminish the range. Thick metal

objects, for example, may totally block the signal.

•

 

The ZoomAir AP11

 

unit and the hub are receiving power.

•

 

The correct printer driver is installed on the computers from
which you are sending print jobs to a remote printer.

Summary of Contents for ZoomAir AP11

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands