manualshive.com logo in svg

Zoom ZoomAir AP11, Installation Manual

Share
Download
Zoom ZoomAir AP11 Installation Manual Download Page 78

78

Installation Guide: Z

OOM

A

IR 

AP11

notice isn’t practical, it may disconnect the service first and notify you as soon as

possible afterwards. In the event such a disconnection is deemed necessary, you

will be advised of your right to file a complaint with the FCC.

From time to time, the telephone company may make changes in its facilities,

equipment, or operations that could affect the operation of this equipment. If this
occurs, the telephone company is required to provide you with advance notice so

you can make the modifications necessary to obtain uninterrupted service.

U.S. REPAIR CENTER INFORMATION:

Zoom Telephonics, Inc.

645 Summer Street

Boston, MA  02210
USA

Telephone Number: (617) 423 1072

Facsimile Number: (617) 542 8276

There are no user serviceable components within this equipment.

It shall be unlawful for any person within the United States to use a computer or
other electronic device to send any message via a telephone facsimile unless such

message clearly contains, in a margin at the top or bottom of each transmitted

page or on the first page of the transmission, the date and time it is sent and an
identification of the business, other entity, or individual sending the message and

the telephone number of the sending machine or of such business, other entity, or

individual. The telephone number provided may not be a 900 number or any
other number for which charges exceed local or long distance transmission

charges. Telephone facsimile machines manufactured on and after December 20,
1992, must clearly mark such identifying information on each transmitted

message. Facsimile modem boards manufactured on and after December 13, 1995,

must comply with the requirements of this section.

This equipment cannot be used on public coin phone service provided by the

telephone company. Connection to Party Line Service is subject to state tariffs.

Contact your state public utility commission, public service commission, or

corporation commission for more information.

Industry Canada CS03 Statement

Notice

: The Industry Canada label identifies certified equipment. This

certification means that the equipment meets telecommunications network
protective, operational and safety requirements as prescribed in the appropriate

Terminal Equipment

 

Technical Requirements document(s). The

 

Department does

not guarantee the equipment will operate to the user’s satisfaction.

Summary of Contents for ZoomAir AP11

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands