Zoom ZoomAir AP11, Installation Manual

Page: 45 / 80

4 Implementing Additional Network Controls 45
4
Implementing Additional
Network Controls
In setting up your ZoomAir AP11 as a wireless access point,
you have already ensured access to your LAN by your
network’s members and provided security measures to keep
out snoopers. Chapter 4 explains your options for configuring
additional network access control features.
The installation and setup you have done in Chapters 1 through 3
have already enabled most of the basic access and security features
in your ZoomAir AP11.
You may not need to go any further than the default configuration,
especially if you’re using the ZoomAir AP11
in a home or small
stand-alone office. Under certain circumstances, however, you may
want to modify or enhance your setup using the built-in
WebManage utility.
Tip:
Some of the concepts and settings here can become quite
complicated. You may wish to rely on a consultant or
networking technician for some of these options. We
encourage you to read through this chapter and determine
your needs and capabilities.
All the features in this chapter are managed via WebManage. You
can start WebManage from any computer on your LAN. On any
wireless client installed at the same time as the ZoomAir AP11.
Start your Internet browser and type in
192.168.0.240
(or
the IP address you have assigned to it in Chapter 2) in the address
box, and press Enter .
If this is the first time you have used WebManage, you will be
asked for certain administrative information, such as a user name
and password. You can read the details of this procedure by