10
ADSL X5v Quick Start
the Encapsulation you select. If you are using PPP, your
service provider should have given you a
username
(usually
your email address or the characters preceding the @ sign in
your email address) and a
password
. These are
NOT
the
username and password that you used to get into the
Basic
Setup
menu.) If you cannot remember or cannot find your
username and password, call your service provider and tell
them you have misplaced your username and password. Then
enter them as well.
3333
Click
Save Changes
.
4444
If the Encapsulation setting that you entered starts with
either PPPoE or PPPoA:
Click
Write Settings to Flash and
Reboot
and
Confirm
. Once the process is complete, the
X5V’s
LINK
light should remain on steady (this should take
about 15 seconds). If it doesn’t, go to the
Troubleshooting
Tips
on page 12.
If the Encapsulation setting that you entered starts with
either 1483 Bridged or 1483 Routed:
You must check now to
make sure that your IP Addressing is correctly set. Go to
Setting IP Addressing
below.
5555
Go to your Web Browser
(i.e., Internet Explorer or Netscape
Navigator) and
try to connect
to a familiar Web address.
6666
If you connect successfully, your installation is complete
and you’re ready to browse the web!
Continue with
Step 5:
Setting Up VoIP Service
on page 13
If
you do not connect successfully, continue with the next step
below.
7777
Go back to the tables on page 26 and enter the next most
frequently used settings—
those labeled (2) if you just
entered (1), or (3) if you just entered (2). Click
Save Changes
,
Write Settings to Flash and Reboot
, and
Confirm
. Once the
process is complete, the X5V’s
LINK
light should remain on
steady (this should take about 15 seconds). Remember, if you
are entering either
1483 Bridged
or
1483 Routed
for your
Summary of Contents for X5V 1610
Page 32: ...3135 D 27311 2005...
