Application
G
uide
[MIDI]
85
Application Guide [MIDI]
This section describes the various MIDI related settings of the RT-323 and gives information on
MIDI track operation.
The RT-323 incorporates the following MIDI functions.
●
Send/receive note information
MIDI note information can be sent out when hitting the pads, and note information can be
received to operate the drum kit and bass program of the RT-323 from an external
component.
●
Send/receive control change information
Control change information triggered by JAM slider operation can be sent out. Control
change information can be received to obtain the same effect as when operating the JAM
slider, for adjusting the track volume or pitch.
●
Send/receive program change information
Program change information triggered by switching the drum kit/bass program can be sent
out. Program change information can be received to switch the drum kit/bass program from
an external component.
●
Send/receive MIDI sync messages
MIDI sync messages such as MIDI clock, start, stop, etc. can be sent and received, to
synchronize operation of the RT-323 to an external component such as a MIDI sequencer or
rhythm machine.
●
Save internal data as bulk dump
Internal RT-323 data and setting information can be sent out as MIDI messages and stored
on an external component such as a MIDI sequencer. By sending these data back to the RT-
323, a previous condition can be restored at any time.
●
Recording playing information on a MIDI track
The RT-323 incorporates a MIDI track which allows recording of MIDI messages in real
time. This is useful for example to record a MIDI sequencer in conjunction with song
accompaniment.
The basic steps for changing MIDI settings are similar for all MIDI items. Proceed as follows.
Press the [UTILITY] key, and use the [
]/[
] keys to call up the indication "MIDI?"
on the display.
1
●
Basic steps
Changing the MIDI Setting
Available MIDI Functions
Application
G
uide
[Remote
Control]
84
While holding down the FS01, press the key or pad that you want to control.
The function controlled by the FS01 will be assigned depending on which key or pad was
operated when holding down the FS01. The available choices and the required operations are
listed below.
Press the [PATTERN] key/[SONG] key, to return to pattern mode/song mode.
Operate the FS01.
The FS01 performs the function set in step 4 (activating the sound of a pad or performing
start/stop remote control.
6
5
Push FS01
+
RT-323 operation
Function
Display
Push one of pads 1 - 13
Push two different pads twice
Push [
■
] key
Push [ ] key
Push [DRUM A]/[DRUM B]/
[BASS] key
Push [TEMPO] key
Push [REPEAT] key
In pattern mode, pushing FS01 produces
sound from that pad.
In pattern mode/song mode, pushing FS01
switches through [Start play]
→
[Stop]
→
[Start play from beginning]
In pattern mode/song mode, pushing FS01
switches through [Start play]
→
[Pause]
→
[Start play from pause position]
In pattern mode/song mode, pushing FS01
switches specified track muting on/off
In pattern mode/song mode, two
subsequent pushed of FS01 specify the
tempo (tap tempo input)
In pattern mode, pushing a pad while
depressing FS01 produces sound from
that pad continuously
The sound of the first pad can be switched
with the FS01.
When the FS01 is pressed, the sound of
the first pad is heard. When you release the
foot switch, the sound of the second pad is
heard. (For example, you could use the
FS01 to toggle between the sound of an
open and closed hi-hat.)
(xx = pad number)
PADxx
➝
yy (xx,yy = pad number)
START
CONTINUE
MUTE xxx (xxx = DrA, DrB, Bas)
TAP
REPEAT
FS01
4
Summary of Contents for RhythmTrak RT-323
Page 1: ...OPERATION MANUAL...
