Press the [PATTERN] key to return to pattern mode.
Operate the FP01/FP02 while hitting the pad.
The effect of moving the pedal is the same as when operating the JAM slider.
When you connect the separately available foot switch (FS01) to one of the the [CONTROL IN]
jacks on the RT-323, you can control a specific pad with the foot switch or control start/stop of
song and pattern playback.
Connect the FS01 to the [CONTROL IN] jack on the rear panel.
For information on connections, see page 6.
You can connect the FS01 to the [CONTROL IN 1] or the [CONTROL IN 2] jack. The two
jacks have the same function.
Press the [UTILITY] key, and use the [
]/[
] keys to bring up the indication
"CTRLIN" on the display.
Push the FS01.
The RT-323 detects the FS01, and the parameter that is controlled by the foot pedal is shown
on the display.
Number of [CONTROL IN] jack
where FS01 is connected
Function assigned
to FS01
FS01
FS01
3
2
1
Controlling the RT-323 With a Foot Switch (FS01)
FP01
6
5
Application
G
uide
[Remote
Control]
83
Application
G
uide
[Remote
Control]
82
Application Guide [Remote Control]
This section describes how to use the [CONTROL IN] jack in conjunction with an optional foot
pedal or foot switch, to perform remote control of the RT-323.
When you connect the separately available foot pedal (FP01/FP02) to one of the [CONTROL IN]
jacks on the RT-323, you can use the FP01/FP02 instead of the JAM slider to adjust parameters
such as pitch or sound change of the currently operated pad.
Connect the FP01/FP02 to the [CONTROL IN] jack on the rear panel.
For information on connections, see page 6.
You can connect the FP01/FP02 to the [CONTROL IN 1] or the [CONTROL IN 2] jack. The
two jacks have the same function.
Press the [UTILITY] key, and use the [
]/[
] keys to bring up the indication
"CTRLIN" on the display.
Operate the FP01/FP02.
The RT-323 detects the FP01/FP02, and the parameter that is controlled by the foot pedal is
shown on the display.
Use the [JAM FUNCTION] key to select the parameter to be controlled with the
pedal.
The available settings are "PITCH", "VOLUME", "PAN" (panning), and "SOUND
CHANGE" (pad sound switching).
4
Number of [CONTROL IN] jack where
FP01/FP02 is connected
Assigned parameter
FP01
3
2
1
Controlling the RT-323 With a Foot Pedal (FP01/FP02)
Summary of Contents for RhythmTrak RT-323
Page 1: ...OPERATION MANUAL...
