If you press the [
●
REC] key instead of the [EXIT] key in step 4, the notes recorded in the
current pattern are aligned to the quantize setting.
This lets you control the amount of rhythm flourish (swing) used by the pattern. Higher values
result in more pronounced swing.
This setting affects all patterns.
In pattern mode, press the [EDIT] key.
Use the [
]/[
] keys to call up the indication "SWING" on the display.
You can now set the swing value.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the swing value (50 - 75).
The default setting is 50 (no swing).
When the setting is complete, press the [EXIT] key.
The setting is updated, and the unit returns to pattern mode.
The length of a user pattern (number of measures) can be adjusted. This setting is stored for each
user pattern individually.
In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
Use the [
]/[
] keys to call up the indication "BARLEN" on the display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the number of measures.
The setting range is 1 - 99. The default length for empty patterns is 2 measures.
When changing the length of a pattern that has already been input, the playback content
changes as follows.
■
More measures than current setting
Blank measures are added to the end of the current pattern.
3
Current setting
2
1
●
Changing the pattern length
4
3
Current setting
2
1
●
Adjusting the rhythm flourish (swing)
Application
G
uide
[Patterns]
51
Application
G
uide
[Patterns]
50
Press the [ENTER] key, and use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the
copy target user pattern (U00 - U99).
To execute the copy process, press the [ENTER] key. To cancel the copy process,
press the [EXIT] key.
When the [ENTER] key is pressed, the copy is carried out and the unit returns to step 1.
This section describes how to change settings that are common to all patterns, and settings that are
user pattern specific (such as beat and tempo).
The quantize value is the smallest unit for real-time input/step input of a pattern.
In pattern mode, press the [EDIT] key.
Use the [
]/[
] keys to call up the indication "QUNTIZ" on the display.
You can now select the smallest unit for the note.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the smallest unit note from the
following available settings.
This setting affects the following four functions.
• Smallest unit for real-time input
• Smallest unit for step input
• Smallest unit for continuous sound interval when pad is hit while holding down [REPEAT] key
• Smallest unit for pattern play start/stop timing adjustment during groove play
When the setting is complete, press the [EXIT] key.
The new setting becomes active and the unit returns to the pattern mode.
4
4:
Quarter note
8:
Eighth note
12:
Eighth triplet note
16:
Sixteenth note
24:
Sixteenth triplet note
32:
Thirty-second note
48:
Thirty-second triplet note
Hi:
1 tick (quantize function off)
* 1 tick is (1/96 of quarter note)
3
Current setting
2
1
●
Setting the quantize value
Changing Pattern Settings
4
Copy target pattern number
3
Summary of Contents for RhythmTrak RT-323
Page 1: ...OPERATION MANUAL...
