When you edit pattern data on the RT-323 and then write the data back to the PS-02
SmartMedia card, the original data will be overwritten. If you want to keep the original
pattern of the PS-02, create a backup of the PS-02 SmartMedia card first. (For details,
refer to the PS-02 Operation Manual.)
Press the [UTILITY] key, and use the [
]/[
] keys to call up "PS-02?" on the
display. Then press the [ENTER] key.
Use the [
]/[
] keys to call up "EXPORT" on the display, and press the [ENTER]
key.
A PS-02 pattern on the SmartMedia card is shown as export target.
When there is an export-enabled pattern in the RT-323, the pattern number is shown.
When writing an edited pattern to the SmartMedia card, the data of the original pattern
number on the card will be overwritten.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the PS-02 pattern to export to.
The RT-323 user pattern to export from is shown.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the RT-323 pattern to export
from.
To carry out the export process, press the [ENTER] key. To cancel the process,
press the [EXIT] key.
When data exporting is complete, the indication "Done" appears on the display. To return to
the pattern/song mode, press the [EXIT] key several times.
If you start up the PS-02 with that card, the exported pattern will be usable in the same way as
an internal pattern.
• The selected user pattern is exported with the contents of drum B track merged onto
the drum A track.
• The maximum number of simultaneous sounds that the PS-02 can produce is four drum
voices and one bass voice. If a pattern that exceeds these numbers is exported,
correct playback with the PS-02 will not be possible.
6
5
RT-323 pattern number
4
PS-02 pattern name
PS-02 pattern number
3
2
Application
G
uide
[SmartMedia]
81
Application
G
uide
[SmartMedia]
80
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the pattern, and press the
[ENTER] key.
The target user pattern number is shown on the display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to select the target user pattern in the RT-
323.
To carry out the import process, press the [ENTER] key. To cancel the process,
press the [EXIT] key.
When data read-in is complete, the indication "Done" appears on the display. To return to the
pattern/song mode, press the [EXIT] key several times.
The imported pattern can be edited in the same way as a normal pattern, using edit mode.
• When changing the sound (drum kit/bass program) of pattern data imported to the RT-
323, select only PS-02 compatible sounds. (For details, see the list at the end of this
documentation.) If you select RT-323 specific drum kit/bass program sounds and
export the data to the PS-02, normal playback may not be possible.
• Do not change the names of patterns imported to the RT-323. Otherwise the pattern
name may not display correctly after the pattern is exported again to the PS-02.
• The bass line included in PS-02 pattern data is imported with the "C" root (no
transposition) and "NON" chord (no transformation) setting.
• When editing the bass track of an imported pattern on the RT-323, note that entering a
phrase with a different root or chord type may result in improper playback when the
data are exported again to the PS-02.
After editing pattern data imported from the PS-02 to the RT-323, you can write the data to the PS-
02 SmartMedia card again. This lets you then use the pattern data in the PS-02.
Insert a PS-02 start-up SmartMedia card into the [DATA CARD] slot on the side
panel of the RT-323.
1
●
Writing a RT-323 pattern to a PS-02 SmartMedia card
(pattern export)
6
5
RT-323 pattern name
RT-323 pattern
number
4
PS-02 pattern name
PS-02 pattern number
Summary of Contents for RhythmTrak RT-323
Page 1: ...OPERATION MANUAL...
