You can adjust the volume of the drum A, drum B, and bass track in a user pattern. This setting is
stored for each user pattern individually.
In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
Use the [
]/[
] keys to call up "MIXLVL" on the display.
Use the [
]/[
] keys to select the track for which you want to change the volume.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the volume for the track (0 - 15).
When a new pattern is created, the volume for all tracks is set to 15. When wishing to adjust
the volume for other tracks, repeat steps 3 and 4.
When the setting is complete, press the [EXIT] key.
The unit returns to pattern mode.
You can change the play timing of the currently selected user pattern.
In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
Use the [
]/[
] keys to call up "SHIFT" on the display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to shift the timing.
The setting range is -192 to 192 ticks (+-2 beats) in units of 1 tick (1/96 of a quarter note).
For example, when the setting value is 24, the pattern changes as follows.
3
Current setting
2
1
●
Changing the play timing (shift)
5
4
3
Current setting
Current track
2
1
●
Setting the volume balance for each track
Application
G
uide
[Patterns]
53
Application
G
uide
[Patterns]
52
■
Fewer measures than current setting
The excessive measures are cut off. After returning to pattern mode, the deleted measures cannot
be restored.
When you change the setting with the [
▲
]/[
▼
] keys or the [VALUE] dial, the indication "E"
appears on the display. When you return the setting to the original value, the "E"
disappears.
When the setting is complete, press the [EXIT] key.
The new setting becomes active and the unit returns to the pattern mode.
The beat (timing signal) of a user pattern can be adjusted. This setting is stored for each user pattern
individually.
In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
Use the [
]/[
] keys to call up "TIMSIG" on the display.
Use the [
▲
]/[
▼
] keys or the [VALUE] dial to set the beat.
The setting range is 1 (1/4 beat) - 16 (16/4 beat). The initial setting for empty patterns is 4 (4/4
beat).
It is possible to change the beat for a pattern that is already input. In this case, the playback
content changes as follows.
■
Longer beat than current setting
Blank space is added to each measure.
■
Shorter beat than current setting
Excessive section of each measure is cut off. After returning to pattern mode, the deleted part
cannot be restored.
When you change the setting with the [
▲
]/[
▼
] keys or the [VALUE] dial, the indication "E"
appears on the display. When you return the setting to the original value, the "E"
disappears.
To update the setting, press the [ENTER] key. To cancel the process, press the
[EXIT] key.
When you press the [ENTER] key the unit returns to pattern mode.
4
3
Current setting
2
1
●
Changing the pattern beat
4
Summary of Contents for RhythmTrak RT-323
Page 1: ...OPERATION MANUAL...
