9
、
GUARD BAR COMPONENT
85
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251300-057093 Non-standard nut M10×1.5(Dacromet)
1
2
1274300-116000 ZT350-S cable fixing bracket
1
3
1251100-132003 Non-standard bolt M10×1.5×80 (Dacromet)
1
4
1250305-009091 GB6187.1 M12×1.25(White Zinc)
1
6
1251100-082093 Non-standard bolts M10×1.5×20(Dacromet)
2
7
1251112-002093 M6×30 Hexagon flange bolts (9.8 grade/color Zinc)
1
8
1274300-067000 ZT350-V water outlet pipe anti-wear bracket
1
9
1251100-061093 M6×22 Hex flang bolt thread (8.8 garde/ color Zinc)
3
10
1186200-013000 ZT310 Rectifier (350W)
1
11
1050958-006000 ZT350 ignition coil body
1
PROCEDURE:
●
Bumper assembly
Use a 14# sleeve to fix the head of the bolt
⑶
on the left side and remove the nut
⑴
with a 14# sleeve, and
move away the cable fixing bracket
⑵
.
Use a 14# sleeve to fix the head of the bolt
⑸
on the right side and remove the nut
⑷
with a 17# sleeve.
After grasping the left and right guard rail assemblies, use a 14# sleeve to remove 2 bolts
⑹
, and then
remove the left and right guard guard assemblies after removing the bolts
⑹
.
●
Left guard bar assembly
Hold the rectifier
⑽
and remove the bolt
⑺
with 8# sleeve then take off the bracke
⑻，
remove the bolt
⑼
then remove the rectifier
⑽
.
Remove the 2 bolts
⑼
and remove the ignition coil body
⑾
.
CAUTION:
●
Be careful not to press any cables when reassembling.
●
When reassembling, pay attention to the radiator outlet pipe below the outlet pipe bracket.
5
1251112-018000 GB5787 non-standard bolt M12×1.25×105(10.9
garde/dacromet)
1
Fig.2 GUARD BAR
COMPONENT
Guard bar assembly 2
