5
、
FOOT PEDAL COMPONENT
45
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
2
1274300-101052 ZT350-S brake pedal
1
4
1264100-006000 ZT250-S Pedal circlip
1
5
1274100-012000 ZT250-S Pedal pin
1
6
1264100-004000 ZT250-S front right foot pedal torsional spring
1
7
1274300-068000 ZT350-VX front foot support (dark gray)
1
8
1244200-115000 ZT310-VX rear right foot pedal rubber mat
1
9
4064200-027051 ZT310-VX front right foot pedal (dark gray matte)
1
1
1250105-278093 GB5789 M10×1.25×25 (10.9 grade environmental
protection color)
1
3
1260100-294000 ZT310-VX brake pedal spring(environmental color
Zinc)
1
PROCEDURE:
●
Front right foot pedal assembly
Remove the U-joint and bolt (1) of the main pump of the rear disc brake according to the previous steps of
"adjustment of the installation position of the front right foot pedal".
Remove the brake pedal (2), torsion spring (3) and pedal assembly.
●
Right foot pedal assembly
Remove the circlip (4), remove the pin (5) and separate the foot support (7), torsion spring (6) and right foot
pedal. Remove the rubber pad (8) from the right foot pedal (9). During reassembly, apply an appropriate
amount of grease on the cylindrical surface indicated by the arrow in Figure 1 to reduce friction. When
assembling the rubber pad (8), pay attention to that the limit boss at the arrow in Figure 2 should be
assembled in place.
CAUTION:
●
The boss of the support shall be aligned with the mounting hole on the pedal support before assembly.
●
Pay attention to the installation direction of pedal torsion spring and brake pedal torsion spring.
Fig.4 FOOT PEDAL
COMPONENT
Front right footrest component
