4
、
REAR WHELL COMPONENT
39
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-061093 M6×22 Hex flang bolt thread (8.8 garde/environmenta
1
2
1276200-043000
φ6 wire clamp (L=57)
1
3
1094200-009000
ZT310-V rear wheel hollow shaft Φ20×345
1
110±5N.m
4
1251300-067000 ZT250-R rear wheel hollow shaft nut
1
5
1020242-414000 ZT310-VX rear fork shaft left bushing
1
6
1020242-415000 ZT310-VXrear axis right bushing
1
7
1244200-086000 ZT310 single rocker arm aluminum alloy flat fork left d
1
10
1244300-055000 ZT350-S single arm rear fork wear block
1
11
1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
4
12
1251100-102000 Non-standard bolt M6×16 (304 stainless steel)
4
13
1250602-035000 HK2516 needle roller bearing
4
14
1244200-079000
ZT310 single rocker arm Φ25×Φ32×4 oil seal
4
9
4074200-008051 ZT310-VX dark gray single rocker aluminum alloy rear
fork assembly (including bearing/oil seal)
1
15
1244200-101000 ZT310 single rocker arm aluminum alloy rear fork
front dustproof rubber plug
1
Rear fork
assembly after
sale
Rear fork component
Fig.17 Rear wheel, swinging
arm component
8
1244200-085000 ZT310 single rocker arm aluminum alloy flat fork right
dustproof rubber plug
1
PROCEDURE:
●
Rear swinging arm assembly
Remove the cable after breaking the clip
⑵
.Remove the bolt
⑴
with 8# sleeve.
Person 1 hold the head of rear swinging arm axle
⑶
with the 24# socket sleeve. Person 2 disassemble nut
⑷
with the 30# socket sleeve.
Person 1 hold the rear swinging arm assembly. Person 2 take off rear swinging arm after disassembling rear
swinging arm axle
⑶
with suitable tool.
Remove the bushing
⑸
and
⑹
, the left dust-proof rubber plug
⑺
, and the dust-proof rubber plug
⑻
,and the
rubber plug
⒂
from the rear fork assembly.
●
Abrasionproof block of rear swinging arm
Remove the 4 pcs bolts
⑿
and the flange bushing
⑾
with the 6# hexagon socket tool and remove the wear-
resistant block
⑽
from the rear fork assembly
⑼
.
●
Rear fork after sale
The oil seal
⒁
and the needle bearing
⒀
are used for interference compression. Please ensure that they have
the ability to disassemble and disassemble.
CAUTION:
●
It is strictly forbidden to hit the threaded part of the rear axle with a hammer.
