ZSC-1000 User Manual.doc
Page 22 of 33
MEYERTECH LIMITED
For each alarm card, in the range 0 to 14
Alarm card NO/NC
Default = Off
VCR Ports
The ZSC-1000 routes commands out to ZVS-MSI units controlling VCRs. These units are normally
connected onto the ZVK port. However the ZSC-1000 can be configured to transmit these commands onto
another port.
For each VCR, in the range 1 to 90
Port
The port used to transmit VCR commands onto.
Default = Zvk
Camera Barring
Camera barring allows camera ranges, either locally or across sites, to be barred to operators with priority
levels less than those defined in this section.
ZSC-1000
