ZSC-1000 User Manual.doc
Page 24 of 33
MEYERTECH LIMITED
Alarm events are the actions that can be configured to occur on the raising of a new alarm.
For each alarm event, in the range 0 to 500
Alarm Action
Record
If enabled a VCR record command will be sent
Default = Off
Switch
If enabled the event camera will be switched to an alarm monitor
Default = On
Primary Action
Action
One of the following actions can be performed on the selected camera (No action, Preset, Walk,
Patrol, Random)
Default = No action
Camera
Camera for the selected action
Default = Event number
Field
The number associated with the action eg Preset number
Default = 0
Global
If enabled the action is performed on all cameras at this site
Default = Off
Secondary Action
Relay mask
Unused
Post Action
Action
One of the following actions can be performed on the selected camera (No action, Preset, Walk,
Patrol, Random)
For preset, home position will be used; for Walk & Patrol number 1 is used.
Default = No action
Report
Keyboard
The keyboard that this alarm event is reported to. A number of values have special meanings
•
0 : all
•
99 : All workstations
•
100 : No reporting
•
101 – 127 : Site 1 - 27
Default = 99
Remote Site
Report the alarm to a remote site (specified in global alarm section)
Default = Off
Alarm
The ZSC-1000 incorporates a fully featured alarm handling system. It is fully configurable for alarm sources,
alarm actions and alarm reports. See the Alarm Handling section for more information on how alarms
operate.
ZSC-1000
