I
NTRODUCTION
2
www.zoll.com
9650-000840-01 Rev. B
•
When in use on a defibrillator/monitor, if the battery pack indicates a fault condition or any
operating state that can prevent the effective use of the defibrillator/monitor, replace that
battery pack as soon as possible.
•
Do not place foreign objects into battery sockets.
•
Do not use the
SurePower II Battery Pack
in the presence of flammable agents (such as
gasoline), oxygen-rich atmospheres, or flammable anesthetics. Using the device in the
presence of flammable agents can cause an explosion.
•
Do not immerse or set the
SurePower II Battery Pack
in liquid. Using the battery near or
within puddles of water may present a shock hazard to the operator, patient, and nearby
personnel.
•
Use only ZOLL chargers to charge ZOLL batteries.
•
If the display indicators on the
SurePower II Battery Pack
are not consistent with the
indicators on the
SurePower
TM
Charger Station
, a fault condition may be present. Remove
the battery from service as soon as practical, and verify the correct operation of the charger,
defibrillator, and battery.
Cautions
•
Follow all recommended maintenance instructions. If a problem occurs, obtain service
immediately.
•
Do not use alcohol or ketones (MEK, acetone, etc.) to clean
SurePower II Battery Packs
.
•
Do not sterilize or autoclave
SurePower II Battery Packs
.
•
Avoid storage of fully depleted battery packs.
•
Do not install batteries into a defibrillator/monitor unit that is not plugged into live AC
mains when storage may exceed 90 days. Battery damage may occur.
•
If you are disposing of a
SurePower II Battery Pack
, contact your local authorities to
determine the requirements for the recycling and disposal of electrical equipment and follow
those requirements.
Notes
•
SurePower II Battery Packs
may feel warm to the touch following a large number of shocks
delivered at maximum energy or after recharging.
•
You can get additional information about the
SurePower II Battery Pack
and its use from the
appropriate ZOLL defibrillator/monitor operator’s guide (for example, labeling information
-- symbols used, Serial Number format, Date of Manufacture, and so on).
