ZOJE ZJ2842-BD, Operation Manual

Page: 38 / 76

25
[2842 2845 2872 2875]
[2842 2845 2872 2875]
[2842 2845 2872 2875]
[2842 2845 2872 2875]
Turn the stitch length dial clockwise or
counterclockwise that the desired stitch
length is at the uppermost position on the
dial.
The larger the number, the longer the
stitch lenger will be.
Turn the stitch length dial clockwise or
counterclockwise that the desired stitch
length is at the uppermost position on the
dial.
The larger the number, the longer the
stitch lenger will be.
If using this machine in place of a single-needle machine,remove the needle which is not being
used. In such cases, do not use the procedures given below to stop the unused needle bar from
moving, otherwise damage to the machine may result.
NOTE If using this machine in place of a single-needle machine,remove the needle which is not being
used. In such cases, do not use the procedures given below to stop the unused needle bar from
moving, otherwise damage to the machine may result.
NOTE
1000 /
Operate the stop lever after the needle has penetrated the material and has moving.
Do not sew at speeds of over 1000 spm while one of the needle bars been stopped.
1000 /
Operate the stop lever after the needle has penetrated the material and has moving.
Do not sew at speeds of over 1000 spm while one of the needle bars been stopped.
L
To stop operation of the left needle bar
Move the stop lever to the L
position.
L
To stop operation of the left needle bar
Move the stop lever to the L
position.
Needle stop Needle stop