ZOJE ZJ2842-BD, Operation Manual, Page: 24 / 76

11
Remarks:The support pin must be installed reliably,otherwise there is danger when the machines is turned over. Remarks:The support pin must be installed reliably,otherwise there is danger when the machines is turned over.
1. Insert the knee lifter complying bar .
2. Insert the two hinges into the holes in the
machine bed.
3. Clamp the hinges onto the rubber Cushions
in the work table,and then place the machine
head onto the head cushions which are on
top of the oil pan coners.
4.Tap the pillow into the table hole.
Tap the pillow securely into the table
hole.If the pillow is not pushed in as faras it will
go the machine head will not be sufficiently stable
when it is tilted back.
1. Insert the knee lifter complying bar .
2. Insert the two hinges into the holes in the
machine bed.
3. Clamp the hinges onto the rubber Cushions
in the work table,and then place the machine
head onto the head cushions which are on
top of the oil pan coners.
4.Tap the pillow into the table hole.
Tap the pillow securely into the table
hole.If the pillow is not pushed in as faras it will
go the machine head will not be sufficiently stable
when it is tilted back.
1.
1. Place the knee lifter assembly onto the knee
lifter bar on the oil pan,and then secure if by
tightening the bolt .
2.
1)
2. Adjust the knee lifter.
1) Lower the presser foot
by using the presser
bar lifter .
1.
1. Place the knee lifter assembly onto the knee
lifter bar on the oil pan,and then secure if by
tightening the bolt .
2.
1)
2. Adjust the knee lifter.
1) Lower the presser foot
by using the presser
bar lifter .