ZOJE ZJ2842-BD, Operation Manual

Page: 35 / 76

22
1. Turn the machine pulley to raise the
needle to its highest position.
2. Insert the bobbin into the rotate hook
so that the winding direction is as
shown in the illustration.
3. Return the rotary hook latch to its
original position.
1. Turn the machine pulley to raise the
needle to its highest position.
2. Insert the bobbin into the rotate hook
so that the winding direction is as
shown in the illustration.
3. Return the rotary hook latch to its
original position.
4. Turn the machine pulley to rotary the ratary hook until the tension spring is visible.
5. Pass the thread throungh slit A in the rotary hook and then pass it at under through tension spring .
6. Pull out the thread to a length of approximately 50mm.
7. Close the slide plates.
4. Turn the machine pulley to rotary the ratary hook until the tension spring is visible.
5. Pass the thread throungh slit A in the rotary hook and then pass it at under through tension spring .
6. Pull out the thread to a length of approximately 50mm.
7. Close the slide plates.