ZOJE ZJ2842-BD, Operation Manual

Page: 36 / 76

23
1. Insert the bobbin into the cap so that
the winding direction is as shown in the
illustration.
2. Thread the thread by one of the following
methods in accordance with the shape of the cap
being used.
1) Pass the thread through slot A and under
the tension spring .
2) Pass the thread through slot B and C ,
and then through the thread-loosening-
pevention spring.
3) Pass the thread through the thread hole
and pull out about 50mm.
3. Turn the machine pulley to raise the needle to
its highest position
4. Insert the cap into the rotary hook.
5. Push latch of the rotary hook flat.
6. Close the bed slide.
1. Insert the bobbin into the cap so that
the winding direction is as shown in the
illustration.
2. Thread the thread by one of the following
methods in accordance with the shape of the cap
being used.
1) Pass the thread through slot A and under
the tension spring .
2) Pass the thread through slot B and C ,
and then through the thread-loosening-
pevention spring.
3) Pass the thread through the thread hole
and pull out about 50mm.
3. Turn the machine pulley to raise the needle to
its highest position
4. Insert the cap into the rotary hook.
5. Push latch of the rotary hook flat.
6. Close the bed slide.
5
2
1
4
3
3
5
5
4
3
7
6
2
7