ZOJE ZJ-M3-S500-SF-V2, Manual

Page: 116 / 190

Template machine - Touch screen E2 Pattern selection interface
20
Under the interface of "middle pressure foot origin detection",
click "position" to enter the interface of "position".
After entering the interface, the icon is shown as blue .
The interface display is as follows:
① Origin state of medium pressure foot: according to origin state
of medium pressure foot, the current ON/OFF state of origin
sensor of medium pressure foot is displayed
② Click "origin" to return to origin
③ Click base point and descend to base point
④ Medium pressure foot servo height: show the current medium
pressure foot height of follow-up, click the "up" , can
increase the medium pressure foot servo height values, click the
"down" , can reduce the medium pressure foot servo
height value, set up is completed, click the "ok" to
determine the medium pressure foot height of follow-up, click the
"restore" , restore the default medium pressure foot
servo height.