ZOJE ZJ-M3-S500-SF-V2, Manual

Page: 114 / 190

Template machine - Touch screen E2 Pattern selection interface
18
In the "XY origin detection" interface, click "offset" to
enter the "offset" interface. The "offset" icon on the interface
shows blue color , and the X-axis origin offset and
Y-axis origin offset are displayed on the interface.
The absolute value of X/Y and relative value of X/Y will be
displayed along with the movement at the top. After the
movement is completed, click "confirm" and the origin
deviation of X/Y axis will be displayed at the value on the right
side of the origin deviation of X axis and the value on the right
side of the origin deviation of Y axis.
① X-axis origin offset: display the current X-axis origin offset.
Click the value on the right side to enter the
parameter setting interface of [K189 X-axis origin offset] :
Enter the value through the number key below the interface, click
"confirm" to confirm the value, and return to the "XY
origin detection" interface, click "back" to cancel the
operation, and return to the "XY origin detection" interface.
In the "XY origin detection" interface, click "restore" to
the right of the origin deviation of the X-axis to restore the value.
② Y-axis origin deviation: display the current Y-axis origin
deviation value. Click the value on the right side to
enter the parameter setting interface of [K01 Y-axis origin
deviation]. The parameter setting method is the same as ①
X-axis origin deviation.