ZOJE ZJ-M3-S500-SF-V2, Manual

Page: 119 / 190

Pattern selection interface Template machine - Touch screen E2
23
② Stroke of cutting line motor: display the current stroke value
of cutting line motor. Click the value on the right
side to enter the parameter setting interface of [stroke of U19
cutting line motor] :
Enter the value through the number key below the interface, click
"confirm" to confirm the value, and return to the
interface of "detection of wire cutting motor", click "return"
to cancel the operation, and return to the interface of
"detection of wire cutting motor".
In the interface of "detection of shear line motor", click "restore"
on the right side of the stroke of the shear line motor to
restore the value.
③ Dividing line stroke: display the current dividing line stroke
value. Click the value on the right side to enter the
parameter setting interface of [U20 dividing line stroke]. The
parameter setting method is the same as [② cutting line motor
stroke].
④ Line breaking time: display the current line breaking time
value. Click the value on the right side to enter the
parameter setting interface of U21 line breaking time.The
parameter setting method is the same as [② cutting line motor
stroke].
⑤ Line cutting time: display the current line cutting time value.
Click the value on the right side to enter the
parameter setting interface of [U22 line cutting time]. The
parameter setting method is the same as [② cutting line motor
stroke].
⑥ Dividing line Angle: display the current dividing line Angle
value. Click the value on the right side to enter the
parameter setting interface of [U23 dividing line Angle]. The
parameter setting method is the same as [② cutting line motor
stroke]