ZOJE ZJ-M3-S500-SF-V2, Manual

Page: 130 / 190

Template machine - Touch screen E2 Pattern sewing interface
34
3.1 Medium pressure foot function
In the interface of "pattern sewing", click "medium pressure foot"
to enter the interface of "medium pressure foot
setting", and the following parameters can be set:
2
Medium pressure foot: basic value can be set up medium
pressure feet start points, click on the "benchmark" middle
presser avoiding, selected on the left shows , parameters
are selected, will display the current parameters, the range
will be automatically updated according to the selected
parameters, parameter values can be below the number keys
to modify, modify finished, click the "ok" to
confirm the changes and return pattern sewing
】
【
interface, click the "cancel" to cancel the
operation and return pattern sewing
】 【
interface.
② Follow height of medium pressure foot: the follow height of
medium pressure foot can be set. The operation method is the
same as "① reference value of medium pressure foot".
③ Medium pressure foot press Angle setting: medium pressure
foot press Angle value can be set.The operation method is the
same as "① reference value of medium pressure foot".
④ Delay of auxiliary presser foot lifting: delay value of auxiliary
presser foot lifting can be set.The operation method is the same
as "① reference value of medium pressure foot".
⑤ Delay of auxiliary foot drop: delay value of auxiliary foot drop
can be set.The operation method is the same as "① reference
value of medium pressure foot".
⑥ Delay of medium pressure foot lifting: delay value of medium
pressure foot lifting can be set.The operation method is the same
as "① reference value of medium pressure foot".
⑦
：
Drop back after the break
Note: this function is only valid when the parameter u14-21 is
broken and the parameter value is set to 1 or 2. The number of
retractable stitches is available in parameters u14-22Set the