ZOJE ZJ-M3-S500-SF-V2, Manual

Page: 113 / 190

Pattern selection interface Template machine - Touch screen E2
17
Under the "XY origin detection" interface, the "detection" and
"deviation" interfaces can be selected.
The default interface of the system is the [detection] interface,
and the "detection" icon in the interface is shown in blue
, with the following contents:
⑨ Installation position of X origin sensor: click "right"
or "left" to switch installation
position of X origin sensor.
⑩ X positive direction: click the right "negative"
or "positive" to switch the direction of X positive
direction.
⑪ Y positive direction: click the right "positive" or
"negative" to switch the direction of Y positive
direction.
⑫ X step Angle fine-tuning: display the current X step Angle
fine-tuning value. Click the value on the right side
to enter the parameter setting interface of U40 X step Angle
fine-tuning:
Enter the value through the number key below the interface, click
"confirm" to confirm the value, and return to the "XY
origin detection" interface, click "back" to cancel the
operation, and return to the "XY origin detection" interface.
In the interface of "XY origin detection", click "restore"
on the right side of X step Angle fine-tuning to restore the value.
⑬ Y step away from the Angle of fine-tuning: show the current
step Y values from the Angle of fine-tuning, but by clicking the
right number , enter the interval Angle fine-tuning
U41 Y parameter Settings interface, parameter setting method
and interval Angle of fine-tuning
【
⑫ X step Angle fine-tuning.
】