S16
Eyelet width
This item sets crosswise size of the inside of eyelet shape.
Actual needle entry point is the dimension to which S04
Knife groove width, left is added.
1.0~10.0
0.1mm
Remark 1
S17
Eyelet length
This item sets lengthwise size of the inside of eyelet shape.
1.0~10.0
0.1mm
Remark 1
S18
Round type shape length
This item sets upper side length from the center of round
type shape.
1.0~5.0
0.1mm
Remark 1
S19
Number of stitches of radial shape
This item sets number of stitches in the
upper 90
ﾟ
of radial shape.
1~8
1
Remark 1
S20
Reinforcement of radial shape
This item sets with / without reinforcement stitching of
radial shape.
：
Without
：
With
Remark 1
Remark 2
S21
Pitch at bar-tacking section
This item sets sewing pitch of bar-tacking section.
0.200~2.500
0.025
S22
1st clearance
This item sets the clearance between 1st bar-tacking and
knife groove. This item is applied to all shapes
0.0~4.0
0.1mm
S23
2
nd
clearance
This item sets the clearance between 2nd bar-tacking and
knife groove. This item is applied to all shapes
0.0~4.0
0.1mm
S31
Single/double stitching
：
Single Stitching
：
Double Stitching
S32
Double stitching cross selection
This item selects overlapped stitching or cross stitching at
the needle entry of parallel section when setting double
Remark 3
20
