Select
to enter the interface.(as shown in
the right figure)
②
②
②
②
Data Table of Sewing
The sewing data is related to the selected shape. Different in shapes, the different in sewing data could be set.
Meanwhile the initial value of sewing data might be different as well.
Under the Mode & Status interface, the user can set the access to part sewing data. Moreover some sewing data will
also be affected by other data of sewing.
No
Item
Range
Unit
Remarks
S01
Sewing shape
Refer to 2.12 Selection of Sewing Shape
1~30
1
S02
Length of cloth cutting
This item sets the length of cloth that is cut by cloth cutting
knife. However, in case of bar-tack shape (Nos. 27, 28, 29
and 30 of), sewing length is set. By making effective U19
Function of plural motions of cloth cutting knife, make the
plural motions of knife by the knife size set in the item U18
Cloth cutting knife size, and the sewing product is cut.
3.0~120.0
0.1mm
S03
Knife groove width, right
This item sets the clearance between cloth cutting knife
and right parallel section.
-2.00~2.00
0.05mm
S04
Knife groove width, left
This item sets the clearance between cloth cutting knife
and left parallel section.
-2.00~2.00
0.05mm
18
