Register parameters which are frequently used
to Management button and use them
Press
to enter user management setting
interface
（
shown as the right figure
）
.
1
1
1
1
Register to Management button
The management buttons can be registered
up to four buttons. Four management
register buttons are displayed on the
screen. When the button located on the
position you desire to register is pressed,
the sewing data list screen is displayed.(as
shown in right figure )
Select the sewing data you wish to register, press
to end the operation of registration. The newly
registered sewing data will be displayed on the user
management button.
1
1
1
1
Original State of Registration
The following items have been registered in
order (from the left to the right) at the time
of your purchase
：
：
Pitch at parallel section
；
：
Compensation of bar-tacking width,
left
Press
to enter the interface for counter setting(as
shown in the right figure)
1
1
1
1
Set the existing value and the set value of
counter
A is the existing value of the counter. Press that figure
to enter the interface for setting existing value of
counter.
B is the set value of the value. When the set value is 0,
the counter can only count number and can’t send
warning. Press that figure to enter the interface for
setting set value of counter.
②
②
②
②
Select the type of sewing counter
Press
or
to enter the interface for selecting
counter type.
：
Sewing UP Counter
Every time the sewing of one shape is
performed, the existing value is counted up.
When the existing value is equal to the set
value, the interface of counter exceed warning
will be displayed. Press
the existing value
will be restored to 0.
：
Sewing DOWN counter
Every time the sewing of one shape is
performed, the existing value is counted down.
When the existing value is reached to "0", the
interface of counter exceed warning will be
displayed. Press
, the existing value of
counter will be restored to the set value .
：
Sewing counter off
③
③
③
③
Select the type of No of piece counter
：
No of piece
No of piece
No of piece
No of piece UP counter
UP counter
UP counter
UP counter
Every time one cycle or one continuous stitching
is performed, the existing value is counted up.
When the existing value is equal to the set
value, the interface of counter exceed warning
will be displayed. Press
to restore the
existing value of counter to 0.
：
No of piece
No of piece
No of piece
No of piece DOWN
DOWN
DOWN
DOWN counter
counter
counter
counter
Every time one cycle or one continuous stitching
is performed, the existing value is counted up.
When the existing value is equal to the set
value, the interface of counter exceed warning
will be displayed
.
he existing value of counter
will be restored to the set value .
42
