S05
Over-edging width, left
This item sets the over-edging width of left parallel section.
0.10~5.00
0.05mm
S06
Ratio of right and left shapes
This item sets enlargement/reduction ratio of right side
shape making the knife position as the center
50~150
1%
S07
Pitch at parallel section
This item sets sewing pitch of left and right parallel
sections
.
0.200~2.500
0.025mm
S08
2nd bar-tacking length
This item sets length of bar-tacking on the front side
0.2~5.0
0.1mm
S09
1st bar-tacking length
This item sets length of bar-tacking on the rear side
0.2~5.0
0.1mm
S10
Compensation of bar-tacking
width, right
This item adjusts right side outer shape of bar-tacking
section in terms of over-edging section.
Both 1st and 2nd bar-tacking can be compensated
.
-1.00~1.00
0.05mm
S11
Compensation of bar-tacking width, left
This item adjusts left side outer shape of bar-tacking in
terms of over-edging section
-1.00~1.00
0.05mm
S12
Flow bar-tacking offset, left
This item sets length to form bar-tacking section of flow
bar-tacking shape.
。
0.00~3.00
0.05mm
Remark 1
S13
Flow bar-tacking offset, right
This item sets length to form bar-tacking section of flow
bar-tacking shape
0.00~3.00
0.05mm
Remark 1
S14
Eyelet shape length
This item sets upper side length from center of eyelet of
eyelet shape.
1.0~10.0
0.1mm
Remark 1
S15
Number of stitches of eyelet shape
This item sets number of stitches in the upper 90
ﾟ
of
eyelet shape
1~8
1
Remark 1
19
