Settings
100
When dialing or calling, the headset is used as an answer mode, and the headset is not
used by default as in the preceding case.
Network setting
IP Phone currently only supported IPv4.They have two mode of Network: DHCP and
Static. The default mode is DHCP, it will obtain IP address and other information
automatically.
If your phone cannot contact a DHCP server for any reason, you need to configure a
static IP address manually.
When switch DHCP and Static IP Address, or change the Static IP on webpage, it will
show the warning of restart as following.
IPv4
If you set IP Mode to IPv4, IP phone will use IPv4 address. IPv4 has two network modes:
DHCP and Static.
To configure IPv4 via Phone interface:
1.
Tap Settings→Advanced(password: admin)→Network or
Menu
→Settings→Advanced(password: admin)→Network→ WAN Port→ IP Port
Mode
2. Change the IP Port Mode.
3. Tap
Save
to save the configuration.
To configure IPv4 via Web interface:
1.
Click Network→ Basic→ Internet Port
2. Select IPv4 for Internet Port.
3. Click
for the setting.
