© Copyright 2002 Zoeller Co. All rights reserved.
3
TYPICAL INSTALLATIONS AND EQUIPMENT LOCATION
LOCATE WATER CONDITIONING
EQUIPMENT CORRECTLY:
Select the location of your water softener with
care. Various conditions which contribute to
proper location are as follows:
1. Locate as close as possible to water supply
source.
2. Locate as close as possible to a floor or
laundry tube drain.
3. Locate unit in correct relationship to other
water conditioning equipment, if applicable
(See Diagram A.) Or, contact factory.
4. Select location where floor is level. If floor
is rough and/or uneven, you can level by
placing cabinet or tanks on 3/4” plywood,
and shim to level as needed.
5. Locate the softener in the supply line
BEFORE the water heater. Temperatures
above 100ºF (38ºC) will damage the
softener and void the warranty.
INSTALL WATER CONDITIONER IN AN
AREA PROTECTED FROM FLOODING,
RAIN, DIRECT SUNLIGHT, DUST, SNOW
AND FREEZING. THE WARRANTY DOES
NOT COVER DAMAGE INCURRED AS A
RESULT OF EXPOSURE TO THE
WEATHER.
6. Allow sufficient space around the
installation for easy servicing.
7. Provide a non-switched 110/120V, 60 Hz
power source for the control valve.
