H0412400.A - EN - 2013-02
3
1. Information before installing
1.1 General delivery terms and conditions
All equipment, even postage and packing paid, travels at the risks and perils of the recipient. Written reserves should be
made on the transporter’s delivery documents if damage during transport is discovered by the recipient (confirmed by
registered letter to the transporter within 48 hours).
1.2 Contents
TRi® Control box
TRi® cell
Flow controller kit
Bag of accessories
1.3 Technical specifications
Power supply voltage
230Vac-50Hz
Electric power
195W
Protection index
IP23
Box size (l x h x d)
31 x 33 x 11 cm
Cell size (L x d)
30 x 10 cm
Weight (box + cell)
7 Kg
Minimum
Maximum
Flow through the cell
5m³/h
18m³/h
Pressure in the cell
/
2,75 bars
Operating water temperature
5 °C
40 °C
2. Installation
2.1 Preparing the pool: water balance
The TRi® is designed to disinfect pool water using its salt water chlorination function.
It is essential that the pool water balance is controlled and adjusted before installing the appliance. Making sure that the
pool water balance is correct from the very start will reduce the likelihood of encountering problems on the first days of
operation or during the season the pool is in use.
Even though it is an autonomous system, it is essential to regularly analyse the water to check the water balance
parameters.
Unit
Recommended
values
To increase
To reduce
Test frequency
(in the season)
pH
/
7,2 – 7,4
Add pH+ or use auto-
matic regulation
Add pH- or use auto-
matic regulation
Weekly
Free chlorine
mg/L or ppm
0,5 – 2
Increase the TRi’s®
chlorine production or
use the Boost mode
Reduce chlorine pro-
duction
Weekly
TAC
(alkalinity or
buffer power)
°f (ppm)
8 – 15
(80 – 150)
Add alkaline corrector
(Alca+ or TAC+)
Add hydrochloric
acid
Monthly
