H0412400.A - EN - 2013-02
11
Message
Possible causes
Soluti ons
PROD. FAULT
•
Cell power supply cable disconnected or
not properly connected
•
Internal electronic problem in the
control box following an external electric
incident
•
Switch off the TRi® chlorinator (
butt on)
and switch off the power supply to the control
box, then check that all the cables are properly
connected (mains power supply, cell, etc.)
• Contact your reseller
INVERSION
The self-cleaning cycle is automati c; this
message is not an error code but an infor-
mati on message
Wait for about 10 minutes and chlorine producti on
will resume automati cally at the previously set
level
To cancel the «CHECK CELL» and «PROD. FAULT» error messages, press for 3 or 4 seconds on
when the
message appears.
The other codes are only informati on messages that disappear automati cally when the operati ng conditi ons re-
turn to opti mal.
6. Registering the product
Register your product on our website:
-
You will be the fi rst to be informed of new Zodiac products and special off ers,
-
You can help us to constantly improve our product quality.
Australia – New Zealand
www.zodiac.com.au
Europe, South Africa & Rest of the World
www.zodiac-poolcare.com
