22
Messages
Meaning
Solution
Check Salt
Check Minerals
Your salinity level
may be low
Take a water sample to the pool shop to see if your
salt or mineral levels need topping up. Please note
that this can be affected by low water temperatures.
If the water temp is below 21ºC it is imperative that
you check the salinity before adding extra salt/
minerals
Check Cell
Cell may be
approaching end
of life
Contact your local pool care professional to ask
about a replacement cell
Check Pump
Pumps output is
off due to pump
protection being
activated
Check to see if there is water flow through the cell
housing, if there is no flow or very low flow there
may be a problem with the pump, or the pump is
disconnected. Ensure all electrical connections
are in place and there is no blockage in the pipe.
Manually turn the chlorinator on to clear the warning
No Flow
Too little or no
flow
of
water
through the cell
housing. Chlorine
production is
halted when
this warning is
displayed
Check to see if there is water flow through the cell
housing, if there is no flow or very low flow there
may be a problem with the pump, or the pump is
disconnected. Ensure all electrical connections are
in place and there is no blockage in the pipe
Check Pwr
Supply
Power pack has
over heated or
encountered a
problem
This warning may appear when the power supply has
over heated and needs time to cool down. It could be
triggered due to very high ambient temperatures or
there may be a heat source nearby (remove the heat
source if possible). If the problem persists you may
need seek help from a pool care professional
Cell Cleaning
Cell has gone into
reversing mode to
clean
This represents the cell is going through its normal
cleanng cycle. There is no need to do anything when
this message is displayed
Boost
Cell is in 100%
production mode
This message represents that the unit is at 100%
output for a 24 hour period
Low
Cell is in 10%
production mode
This message represents that the unit is at 10%
output
MESSAGES AND WARNINGS. WHAT THEY MEAN.
