15
ATTENTION JANDY ‘REV L’ OR LATER USERS
It is critical that the controller setting be set to the correct Zodiac or Jandy controller
designation. There are a number of different revisions locked into the TRi-XO
software. Please see the controller user manual to determine the model and/or
revision you are using. If the incorrect setting is selected, damage can be caused
to the Aqualink Control Unit.
IMPORTANT WARNING
• Wiring of the controller should be completed by an authorised pool equipment
installer.
• Before any wiring connections/disconnections ensure mains power is
removed from both the controller and the Zodiac TRi-XO unit.
• When connected to a controller, the TRi-XO Chlorine generator acts as the
‘slave’ - responding to requests. This means timer settings are ignored and
the output settings cannot be changed, although all other ‘menu’ functions
are still accessible, except for LOW and BOOST modes.
WIRING TO A CONTROLLER
The following instructions should be read in conjunction with the installation guide
provided with the Controller.
1. Remove black ‘dress’ cover by pressing in at the
sides
2. Remove the screws which attach the lower cover
to the main unit:
CONNECTING TO A CONTROLLER
