![background image](http://html2.mh-extra.com/html/zodiac/iaqualink-z400iq/iaqualink-z400iq_instructions-for-installation-and-use-manual_3995888008.webp)
6
❶ Installation
1.1 I Selecting the location
•
The appliance must be installed at 2 metres, minimum, from the surrounding edge of the
pool.
•
Do not lift the appliance by the body; use straps (not provided, see §
“
1.1.1 I Setting up the
device“).
•
Exercice care during handling of the device. The evaporator (marking in §
“
5.3 I Dimensions
and marking
“
) can be easily damaged.
•
The evaporator (marking in §
“
5.3 I Dimensions and marking
“
) may contain
sharp edges which can cause injury.
In order to prevent any injury, wear protective gloves during servicing
operations which may involve contact with the evaporator.
•
Only an outdoor installation is possible, provide free space around the appliance according to diagram § ‘’1.2 I
Hydraulic connections’’.
•
Place the appliance on its anti-vibration blocks (integrated under its base, height adjustable) on a stable, solid and
level surface,
• This surface must be able to bear the weight
(voir § 5.2 I
“
Technical specifications
”
) of the appliance (in particular in
the case of installation on a roof, a balcony or any other support).
: front
: rear
: connections
: Anti-vibration blocks
View of the appliance base from below for installing the anti-vibration blocks
(MD4 / MD5 / MD7 / TD7 models)
View of the appliance base from below for installing the anti-vibration blocks
(MD8 / TD8 / MD9 / TD9 models)
The appliance must not be installed:
•
With the blowing towards a permanent or temporary obstacle (awning, brushwood, etc.) less than 5 metres away,
•
Within range of water or mud jets, sprays or run-off (take the effect of the wind into account),
•
Near a heat source or flammable gas,
•
Near high-frequency equipment,
•
In a location where it would be subject to snow build-up,
•
In a location where it might be flooded by the condensates produced by the appliance when operating.
EN
Summary of Contents for iAquaLink Z400iQ
