background image

1

 WARNINGS

Read  the  instructions  in  this 

manual carefully before using the 

device.

Z400iQ MD4, MD5, TD7, TD8 and 

TD9

 models contain R32.

• 

Before handling the appliance, it is vital that you read this installation and user 

manual, as well as the “Warranty” booklet delivered with the appliance. Failure 

to do so may result in material damage or serious or fatal injury and will void the 

warranty.

• Keep and pass on these documents for later viewing throughout the appliance’s 

service life.

• 

The distribution or modification of this document in any way is prohibited, without 

prior authorisation from Zodiac®.

• 

Zodiac® is constantly developing its products to improve their quality; therefore, 

the information contained in this document may be modified without notice. 

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment 

or cause serious injury, even death.

• 

Only  a  person  qualified  in  the  technical  fields  concerned  (electricity, 

hydraulics  or  refrigeration)  is  authorised  to  perform  any  servicing 

or  repairs  to  the  appliance.  The  qualified  technician  working  on  the 

appliance must use/wear personal protective equipment (such as safety 

goggles and protective gloves, etc.) in order to reduce the risk of injury 

occurring when working on the appliance.  

• 

Before handling the machine, ensure that the power is switched off and isolated 

from the power supply.

• 

The appliance is intended to be used for pools and spas for a specific purpose; it 

must not be used for any purpose other than that for which it was designed.

• 

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning use of the appliance by 

a person responsible for their safety. Children should be supervised to ensure that 

they do not play with the appliance.

• This appliance can be used by children aged from 8 years and above and persons 

with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use of 

the appliance in a safe way and understand the hazards involved. Children shall 

not play with the appliance. Cleaning and user maintenance shall not be made by 

children without supervision.

• 

The appliance must be installed according to the manufacturer’s instructions and 

in compliance with local standards. The installer is responsible for installing the 

appliance  and  for  compliance  with  national  installation  regulations.  Under  no 

circumstances may the manufacturer be held liable in the event of failure to comply 

with applicable local installation standards.

• For any work other than the simple user maintenance described in this manual, the 

product should be referred to a qualified professional.

• 

If the appliance suffers a malfunction, do not try to repair it yourself; instead contact 

a qualified technician.

• 

Refer to the warranty conditions for details of the permitted water balance values 

for operating the appliance.

• 

Deactivating, eliminating or by-passing any of the safety mechanisms integrated 

into the appliance shall automatically void the warranty, in addition to the use of 

spare parts manufactured by unauthorised third-party manufacturers.

• 

Do not spray insecticide or any other chemical (inflammable or non-inflammable) 

in the direction of the appliance, as this may damage the body and cause a fire.

• 

Do not touch the fan or moving parts and do not place any objects or your fingers 

in the vicinity of the moving parts during operation of the appliance. Moving parts 

can cause serious injury or even death.

Summary of Contents for iAquaLink Z400iQ


































Reviews: