4
5
ZODIAC
FloPro ssPump installation & Operation Manual
EQUIPMENT INFORMATION RECORD
DATE OF INSTALLATION
....................................................................................................................................
INSTALLER INFORMATION
................................................................................................................................
......................................................................................................................................................................................................
INITIAL PRESSURE GAUGE READING (WITH CLEAN FILTER)
.........................................
(IF APPLICABLE)
PUMP MODEL
.........................................................................
KILOWATT
............................................................
NOTES
....................................................................................................................................................................................
......................................................................................................................................................................................................
......................................................................................................................................................................................................
Section 1. Important Safety Instructions
READ AND FOLLOW ALL INSTRUCTIONS
1.1 Safety Instructions
All electrical work must be performed by a licensed electrician and conform to all national,
state, and local codes. When installing and using this electrical equipment, basic safety
precautions should always be followed, including the following:
RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED, CAN
RESULT IN SERIOUS INJURY AND/OR DEATH.
Do not block pump suction, as this can cause severe injury and/or death.
To reduce the risk of injury, do not permit children to use this product.
To reduce the risk of property damage and/or injury, do not attempt to change
the backwash multiport valve position with the pump running.
The Pump is for fixed installations only and to be used in conjunction with
swimming pool equipment. (E.g. filters). The pump is to be installed in accordance
with the relevant requirements of the South African wiring rules. Occupational
Health and Safety Act, 1993 (Act no. 85 of 1993) schedule electrical installation
regulations
Also refer to the installation instructions relating to the swimming pool equipment
of which the pump will be an integral part.
The pump is to be supplied through a circuit breaker with a related residual
operating current of 30mA.
Chemical spills and fumes can weaken pool/spa equipment. Corrosion can cause
filters and other equipment to fail, resulting in severe personal injury or property
damage. Do not store pool chemicals near your equipment.
CAUTION: Do not start pump dry!
Running the pump dry will cause severe damage and
will void the warranty.
CAUTION:
This pump is for use with permanently installed pools and may also be used
with spas. Do not use with storable pools. A permanently installed pool is constructed in
or on the ground or in a building such that it cannot be readily disassembled for storage.
A storable pool is constructed so that it may be readily disassembled for storage and
reassembled to its original integrity.
SAVE THESE INSTRUCTIONS
