12
PRO/EXT — User’s Manual
Potting procedure
3.3.4
EXT module (if applicable)
1.
If EXT module connector is not used, mount the sealed connector using the supplied jackpots, without thread-
lock, at 45cm.N torque.
2.
If EXT module connector is wired, then PRO and EXT modules need to be assembled (see procedure below)
before assembling the EXT connector jackpots.
3.3.5
Preliminary clean-up
Clean-up board and module (or modules) with ethanol and oven-dry one hour at 60°C.
3.3.6
PRO and EXT assembly (if applicable)
1.
Connect the two modules using the internal connector.
2.
Place at least two rods in the guide holes and assemble the module with the two supplied M2x12 screws, with-
out thread-lock, at 30cm.N torque.
Summary of Contents for EXT
Page 1: ...Prototyping Extension Modules User s Manual Document No MUT300082E1R1 02 2017 PRO EXT ...
Page 26: ...22 PRO EXT User s Manual Service T H I S P A G E I S I N T E N T I O N A L L Y B L A N K ...
Page 28: ...24 PRO EXT User s Manual T H I S P A G E I S I N T E N T I O N A L L Y B L A N K ...
Page 29: ...Notes ...