14
PRO/EXT — User’s Manual
Potting procedure
3.3.9
Potting material preparation
Zodiac Data Systems recommends using XE14-B7892 elastomer compound:
1.
Mix in equal proportions the two components :
□
PRO: 15g of A and 15g of B
□
PRO+EXT: 30g of A and 30g of B
2.
Stir for three minutes
3.
It is recommended to degas the compound at this point
4.
Fill a syringe (35cc for example) with the compound
5.
Use a plastic nozzle, and place in caulking gun
6.
Hold vertical (nozzle upward) and chase the air out
7.
Inject compound in the tool’s feeding hole, while holding the modules at a 45° angle. Inject slowly and regularly
until fluid overflows:
8.
Place cap on feeding hole.
9.
Let rest for five minutes
10. Oven-dry for 15 minutes at 100°C
11. Let it cool
CAUTION!
Once mixed, compound must be used within one hour.
Summary of Contents for EXT
Page 1: ...Prototyping Extension Modules User s Manual Document No MUT300082E1R1 02 2017 PRO EXT ...
Page 26: ...22 PRO EXT User s Manual Service T H I S P A G E I S I N T E N T I O N A L L Y B L A N K ...
Page 28: ...24 PRO EXT User s Manual T H I S P A G E I S I N T E N T I O N A L L Y B L A N K ...
Page 29: ...Notes ...