Zodiac EXT, User Manual, Page: 5 / 30

MUT300082E1R1 — 02 – 2017 1
INTRODUC
TION
1. INTRODUCTION
1.1 About this User’s Manual
This User’s Manual includes the information necessary for the installation and operation of the PRO/EXT modules.
This document describes external interfaces and how to configure these modules with eZ Software.
Read this document completely before using these module.
1.2 General information
PRO/EXT modules allow hardware customization of the DAU embedding user defined electronics.
Traditionally, these features were embedded in the harness or in additional external boxes leading to complex me-
chanical integration and non-flexible costly solutions.
The user can implement a specific board or a wire based solution. Its electronics can be either passive or active,
the PRO module provides power supply from the DAU stack to the user defined electronics.
1.2.1 PRO module
The PRO module is installed as a standard module.
1.2.2 EXT module
The EXT module must be associated with a PRO module to provide more component height and I/O capabilities for
the user electronics. It avoids having Y cables in an application where inputs are coming from an A/C cabling sys-
tem, being adapted in the PRO / EXT modules before going to another module (e.g. the ANA module).
1.3 Reference Documents
RD1
MUT300107 XMA/CMA System Reference
RD2
MUT300059 XMA Series Assembly/Disassembly instructions
RD3
MUT300049 eZ Software User’s Manual
RD4
MUT300053 XMA/CMA Series Status Reference Manual
RD5
FTP300057 XMA PRO/EXT Datasheet
RD6
FTP300110 CMA PRO/EXT Datasheet